The first crack in a new oven is worth documenting before it is covered by a repair. A photograph alone, without location, scale, and date, does not show whether the change is increasing. Prepare a record that allows comparison of the cold structure's condition after each planned stage.
Describe the exact location
Mark the crack on a sketch of the chamber or casing. Take an overall photo and a close-up with a reference point. Note whether the change is in the material, in the joint, or at the boundary of two parts, and whether any movement or detachment has appeared.
In Vitcas Casa oven, keep information about the variant and the installation method. Do not assume a single assessment for the exterior finish and the chamber parts. A loose fragment or altered support requires recognition before further work.
Collect the preparation history
Record the dates of wet works, materials used, weather, and completed drying stages. Outdoor Oven Cement has its own requirements for proper connection. The mere hardening of the joint does not confirm the drying of the entire oven.
Add the conditions of the first heatings and the state after cooling. Do not assign a single cause to each crack without comparing the support, moisture, and usage method. The next photograph should show the same point from a similar angle.
Select the repair based on the functional assessment
Heat Resistant Filler has specific applications for appropriate minor defects and connections. It is not an automatic repair for every cracked chamber nor a method to stop structural movement. The product is chosen only after determining the extent of the defect.
If the change increases or is accompanied by displacement, stop further use and determine an assessment appropriate for the equipment. Keep the original record even after the repair. This will allow checking the result, instead of starting another assessment from a new surface covering the previous crack.